Token Bit Manager

Pin List

0.25 Micron Version

 


TBM Pin Description
VA+ +2.5v Analog Supply Voltage
ACap Analog Voltage Regulator Output for Capacitor Connection
VD+ +2.5v Digital Supply Voltage
DCap Digital Voltage Regulator Output for Capacitor Connection
GND Common Supply Return (0v)
Cap Capacitor for LVDS Drivers

(2 independent caps, 1 per pin)

   
Reset Hard wire reset pin, VD+ = Reset, GND=INACTIVE
   
Ha4 Ha3 Ha2 Ha1 Ha0 Hub address, MSB to LSB. Connect either to GND or VD+.(There are pull down resistors internally).
   
SDAIn- SDAIn+ I2c data input from fec.
SDaOut- SDaOut+ I2c data output to from fec.                                                                                            
   
ClkIn- ClkIn+ 40Mhz clock from DLL
TrigIn- TrigIn+ Extracted Trigger input from DLL
   
Clk- Clk+ Clock to ROC. Two ports from Each TBM.
   
TokOut+ TokOut- Token out to ROC. One from each TBM.
TokIn+ TokIn- Token in from ROC One to each TBM.
   
T1+ T1-        Trigger out to ROC. Two ports from Each TBM.
   
AOut+ AOut- Analog Output from Each TBM.
AOut+ AOut- Analog Input from ROC. Two Inputs for Each TBM.
   
SDa0- SDa0+ Fast I2c port0 Data to ROC
SDa1- SDa1+ Fast I2c port1 Data to ROC
SDa2- SDa2+ Fast I2c port2 Data to ROC
SDa3- SDa3+ Fast I2c port3 Data to ROC
 

 

Return to TBM Page

Return to Main Page


Rev  04/05/02

Contact bartz@physics.rutgers.edu
with questions, comments, or update information.


Sketch of Serin Lab